Model NO.: NT-SSDVE
Type: Double Seater
Valve Seat Option: Silicone, EPDM, Viton, NBR
Temperature Range: -20 Degree Celsius to 220 Degre or Upon Request
Processing Machine: Forge Processing, Advance CNC
Connection Ends Option: Triclamp, Male or Upon Request
Trademark: NEW TEK
Transport Package: Bubble Plate-Carton-Plywood Case
Specification: 1"-4"
Origin: China
HS Code: 848180409
Model NO.: NT-SSDVE
Type: Double Seater
Valve Seat Option: Silicone, EPDM, Viton, NBR
Temperature Range: -20 Degree Celsius to 220 Degre or Upon Request
Processing Machine: Forge Processing, Advance CNC
Connection Ends Option: Triclamp, Male or Upon Request
Trademark: NEW TEK
Transport Package: Bubble Plate-Carton-Plywood Case
Specification: 1"-4"
Origin: China
HS Code: 848180409
Features:
Caution, opening / closing time:
Opening / closing time will be effected by the follwing
The air supply (air pressure)
The length and dimensions of the air hose.
Number of valves connected to same air hose.
Use of single solenoid valve for serial connected air
actrator functions.
Product pressure.
Air connections
Compressed air:
R1/8"(BSP), internal thread.
Technical data
Air pressure:-------------5 to 7 bar.
This is a sanitary pneumatic seat valve,designed for safety and leak detection when two different products flow through only one valve.The valve is often used as a part in CIP return lines or other systerms not experiancing pressure spikes offering leakage detection for greater safety.
Working Principle:
SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.
The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.
The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmospheric pressure between them.Leaking products flows into the leakage chamber and is discharged through the detecting valve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of the valve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.
Technical Data:
| Max.Product Pressure(depanding on valve specification) | 1000kPa(10 bar) |
| Max.product Pressure(depanding on valve specification) | 145 PSI (10 bar) |
| Min Product Pressure | Full Vacuum |
| Temperature Range | 10 ºC~140 ºC(EPDM) |
| Temperature Range | 14ºF~284ºF(EPDM) |
| Air Pressure | 500-800 kPa(5-8 bar) |
| Air Pressure | Â |
Packing &Â shipping information of the China Tri Clamp Butterfly Valves with Stainless Steel Fiber Handle.
      Port: Shanghai Port or Ningbo Port,China
      MOQ: 5piece
      Supply ability: 5,000 pieces/month
      Payment terms: T/T,Western Union, Paypal, L/C
      Packaging:Shrink Wrap-Carton Case-Exporting Plywood Case
      Delivery time:Depends on quantity
      Shipping mode:By sea,by air,by express
Our Service
| 1. Samples: Buyer bear the air fee, but this fee will be reduced from order directly | |
| 2. Delivery: Never delay delivery time | |
| 3. Ensure material pure | |
| 4. After Sales: Please contact our After-sales service department in time within 30 days after you received the cargo. Tel: 0086-13186832570 ,Working Time: 9:00 a.m.- 6:00 p.m. (Beijing time)Â | |
| Â Â Â Â Â Â Process | Please provide the copy of Sales Contract and describe the problems appeared. |
| Slight problem | Please send the proof to our After-Sales Department, we will reply within two days. |
|  Serious problem  |
a. We will dispatch our Quality and Problems Appraisers to make a confirmation |
| b. Have a negotiation of the compensation and sign agreements | |
| c. Our After-Sales Department will perform the duties as the agreements | |
| Â Â Â Â Replacement | Free replacement if there is any quality problem |
    1. Ten years of export experience
    2. Pass SGS Certificate
    3. Experienced R&D Department
    4. Reliability
    5. Reputation
    6. Buyer's Specifications Accepted
Â
FAQ:
1. Are you a trader or manufactor?
We are a manufactor with forging workshop, CNC machining workshop, polish workshop, gasket workshop, the real one-stop service.
2. Can your products reach to FDA , CE and 3A requirements?
 Yes, all of our material can meet requirements of FDA, ISO and 3A Certificate.
3. Can you supply other stainless steel parts?
Yes, with our own factory, we can manufacture series valves and fittings, such as sanitary butterfly valve, sanitary check valve and diaphragm calves etc, various tank accessories as well, such as sight glass, strainers/filter, cleaning ball, And other pipe fittings, european unions, inline fittings in SMS, DIN, IDF, RJT, 3A,DS standards. Pipe ittings, ferrule, flbow, tee, reducer,cross and customized fittings, each product is tested well by our serious Quality Control System, and we also have excellent distribution service to support you and promote your business.
4.Lead Time:
We ship products overworld.
For large quantity, as usual, it can be sent out within 20-40 days, ferrules, unions, elbows, sight glass, manways etc in common size are often in stock. DHL, FedEx, UPS OR TNT Courier are optional.
Big cargo will be delivered by Air freight or By Sea.
Â
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
6.About samples:
We can provide samples production and service. Usually 2Â to 5Â days, the sample can be sent you by door to door servie. We will choose the shipping way as you required: By sea, by air or by express.Â
7.For OEM products:
We will finish the production within 20-40 days for bulk order after payment has been confirmed. 1-2 days delivery time for stock products. We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.
8.Warranty:
Any question will be responded within 12 hours, one year warranty for stainless steel parts.
9.Problem Solution:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you, or we can send you brand new one for replacement.
10.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
We also supply:
1.Sanitary valve
Sanitary Butterfly Valves
Sanitary Check Valves
Sanitary Ball Valvess
Sanitary Reversal Valve
Sanitary Diaphragm Valves
Sanitary Sample Valves
2. Sanitary Pipe Fittings
Sanitary Elbow
Sanitary TeeSanitary Reducer
Sanitary Cross
Sanitary Triclamp Ferrule
Sanitary Cap
Sanitary Pipe Hanger
Sanitary Tank Cleaning Ball
Sanitary Hose Joint
Sanitary Unions
Sanitary Sight Glass
Sanitary Strainer
3. Sanitary Manways
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure
Sanitary Square Manway
Sanitary Oval Manway
4. Sanitary Pumps
Sanitary Centrifugal PumpSanitary Lobe Pump
Sanitary Self Priming Pump
5.Sanitary Tanks
Storage Tank
Fermentation Tank
Mixing Tank
Warm-keeping Tank
6.Sanitary TubeÂ
Seamless TubeÂ
Weldless Tube
7.Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union
Silicone/EPDM Gasket for Butterfly Valve
Silicone/EPDM Gasket for Manhole Cover
Welcome to contact us for stainless steel aspetic sanitary ss304 ss316L sample cock valve
NEW TEK INDUSTRIAL CO.,LTD
ROWAN SHI
Â
Â
Â
Â
Â
Â
Features:
Caution, opening / closing time:
Opening / closing time will be effected by the follwing
The air supply (air pressure)
The length and dimensions of the air hose.
Number of valves connected to same air hose.
Use of single solenoid valve for serial connected air
actrator functions.
Product pressure.
Air connections
Compressed air:
R1/8"(BSP), internal thread.
Technical data
Air pressure:-------------5 to 7 bar.
This is a sanitary pneumatic seat valve,designed for safety and leak detection when two different products flow through only one valve.The valve is often used as a part in CIP return lines or other systerms not experiancing pressure spikes offering leakage detection for greater safety.
Working Principle:
SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.
The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.
The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmospheric pressure between them.Leaking products flows into the leakage chamber and is discharged through the detecting valve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of the valve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.
Technical Data:
| Max.Product Pressure(depanding on valve specification) | 1000kPa(10 bar) |
| Max.product Pressure(depanding on valve specification) | 145 PSI (10 bar) |
| Min Product Pressure | Full Vacuum |
| Temperature Range | 10 ºC~140 ºC(EPDM) |
| Temperature Range | 14ºF~284ºF(EPDM) |
| Air Pressure | 500-800 kPa(5-8 bar) |
| Air Pressure | Â |
Packing &Â shipping information of the China Tri Clamp Butterfly Valves with Stainless Steel Fiber Handle.
      Port: Shanghai Port or Ningbo Port,China
      MOQ: 5piece
      Supply ability: 5,000 pieces/month
      Payment terms: T/T,Western Union, Paypal, L/C
      Packaging:Shrink Wrap-Carton Case-Exporting Plywood Case
      Delivery time:Depends on quantity
      Shipping mode:By sea,by air,by express
Our Service
| 1. Samples: Buyer bear the air fee, but this fee will be reduced from order directly | |
| 2. Delivery: Never delay delivery time | |
| 3. Ensure material pure | |
| 4. After Sales: Please contact our After-sales service department in time within 30 days after you received the cargo. Tel: 0086-13186832570 ,Working Time: 9:00 a.m.- 6:00 p.m. (Beijing time)Â | |
| Â Â Â Â Â Â Process | Please provide the copy of Sales Contract and describe the problems appeared. |
| Slight problem | Please send the proof to our After-Sales Department, we will reply within two days. |
|  Serious problem  |
a. We will dispatch our Quality and Problems Appraisers to make a confirmation |
| b. Have a negotiation of the compensation and sign agreements | |
| c. Our After-Sales Department will perform the duties as the agreements | |
| Â Â Â Â Replacement | Free replacement if there is any quality problem |
    1. Ten years of export experience
    2. Pass SGS Certificate
    3. Experienced R&D Department
    4. Reliability
    5. Reputation
    6. Buyer's Specifications Accepted
Â
FAQ:
1. Are you a trader or manufactor?
We are a manufactor with forging workshop, CNC machining workshop, polish workshop, gasket workshop, the real one-stop service.
2. Can your products reach to FDA , CE and 3A requirements?
 Yes, all of our material can meet requirements of FDA, ISO and 3A Certificate.
3. Can you supply other stainless steel parts?
Yes, with our own factory, we can manufacture series valves and fittings, such as sanitary butterfly valve, sanitary check valve and diaphragm calves etc, various tank accessories as well, such as sight glass, strainers/filter, cleaning ball, And other pipe fittings, european unions, inline fittings in SMS, DIN, IDF, RJT, 3A,DS standards. Pipe ittings, ferrule, flbow, tee, reducer,cross and customized fittings, each product is tested well by our serious Quality Control System, and we also have excellent distribution service to support you and promote your business.
4.Lead Time:
We ship products overworld.
For large quantity, as usual, it can be sent out within 20-40 days, ferrules, unions, elbows, sight glass, manways etc in common size are often in stock. DHL, FedEx, UPS OR TNT Courier are optional.
Big cargo will be delivered by Air freight or By Sea.
Â
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
6.About samples:
We can provide samples production and service. Usually 2Â to 5Â days, the sample can be sent you by door to door servie. We will choose the shipping way as you required: By sea, by air or by express.Â
7.For OEM products:
We will finish the production within 20-40 days for bulk order after payment has been confirmed. 1-2 days delivery time for stock products. We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.
8.Warranty:
Any question will be responded within 12 hours, one year warranty for stainless steel parts.
9.Problem Solution:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you, or we can send you brand new one for replacement.
10.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
We also supply:
1.Sanitary valve
Sanitary Butterfly Valves
Sanitary Check Valves
Sanitary Ball Valvess
Sanitary Reversal Valve
Sanitary Diaphragm Valves
Sanitary Sample Valves
2. Sanitary Pipe Fittings
Sanitary Elbow
Sanitary TeeSanitary Reducer
Sanitary Cross
Sanitary Triclamp Ferrule
Sanitary Cap
Sanitary Pipe Hanger
Sanitary Tank Cleaning Ball
Sanitary Hose Joint
Sanitary Unions
Sanitary Sight Glass
Sanitary Strainer
3. Sanitary Manways
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure
Sanitary Square Manway
Sanitary Oval Manway
4. Sanitary Pumps
Sanitary Centrifugal PumpSanitary Lobe Pump
Sanitary Self Priming Pump
5.Sanitary Tanks
Storage Tank
Fermentation Tank
Mixing Tank
Warm-keeping Tank
6.Sanitary TubeÂ
Seamless TubeÂ
Weldless Tube
7.Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union
Silicone/EPDM Gasket for Butterfly Valve
Silicone/EPDM Gasket for Manhole Cover
Welcome to contact us for stainless steel aspetic sanitary ss304 ss316L sample cock valve
NEW TEK INDUSTRIAL CO.,LTD
ROWAN SHI
Â
Â
Â
Â
Â
Â