The wrecker is mainly composed of: chassis, lifting device, lifting traction device, hydraulic system, electronic control system, body and tool box, etc. It is equipped with many functions such as lifting, pulling and pulling, etc., suitable for high speed Road and urban road repair operations.
The use of wreckers Wreckers are special construction vehicles designed to ensure the smooth flow of roads. They are important equipment for traffic management in busy urban areas and highways. It can quickly, timely and safely clear accidents, breakdowns, illegal vehicles on roads, and special vehicles to divert road traffic.
First, the wrecker is divided into four categories: a lifting and detaching wrecker, a lifting and unloading wrecker, a flat wrecker, and an ordinary type. Among them, the lifting and separating type wrecker includes two types of jib rotary wrecker and non-rotating wrecker.
Second, people often say that the 3 tons of wreckers, 5 tons of wreckers, 8 tons of wreckers, 20 tons of wreckers and other specifications of wreckers, in fact, refers to the kind of wrecker chassis The level of carrying capacity. It has a certain relationship with the total mass of the towed vehicle, but there is no inevitable connection. The larger the tonnage, the wrecker's operating capacity is correspondingly larger.
Third, when wreckers are to be towed (drag) vehicles away from the site, they are generally supported and dragged. Support is to use the support arm of the wrecker to be lifted and pulled by the trolley. Dragging, that is, people often say hard drag, is the use of the wrecker will be hard to pull the trailer to drive.
Among them, the care of the wrecker must meet the following two conditions.
1. The lifting weight of the supporting arm is not more than the lifting weight of the wrecker, and the lifting weight of the lifting arm gradually decreases as the supporting arm lengthens.
2. The quality of the rated care must not exceed its maximum total mass. That is to say, the total mass of the vehicles that are taken care of must not exceed the maximum total mass of the wrecker. For example, in the 5140TQZ wrecker, the total mass of the vehicle that is being held is not to exceed 14 tons at first, and the weight of the lifting point of the care arm is also considered to be within the rated lifting mass range. Wrestling ability of wreckers is related to the maximum total mass of the wrecker and engine power. Article 3.6 of GB7258 “Technical Conditions for Operational Safety of Motor Vehicles†stipulates that the specific power of motor vehicles shall not be less than 4.8 kW/t, and the dragging and pulling capacity of the wrecker must meet this requirement.
Fourth, the use of the car's operation methods, precautions, etc., are used and the service life of the wrecker is extended.
The market of wreckers With the rapid development of China's economy, the construction of highways has progressed by leaps and bounds, and the mileage has continuously increased. China's “five vertical and seven horizontal†highway main lines will be basically completed.
The available wreckers are difficult to complete and remove obstacles, which seriously affect traffic. A wrecker manufacturer hopes to solve this problem by increasing the tonnage of the chassis. However, the ability to raise the holding capacity is limited, and the vehicle price increases several times, affecting the economic efficiency of users. Therefore, the market calls for wreckers with large lifting capacity and support.
What products are suitable for the transparent packaging box:
In fact, the transparent packaging box should be regarded as a kind of universal packaging box. Many products seem to use this type of transparent packaging box and then print it. Like this type of transparent packaging box, some special processes can be carried out, such as the most commonly used bronzing. All can be realized on the plastic packaging box
We have talked about two materials for transparent packaging boxes before, one is PVC and the other is PET. These two plastic materials are the more commonly used materials for packaging so far. Of course, we have mentioned before PP frosted material, this frosted material belongs to a translucent packaging box, because the frosted effect will produce a hazy feeling, and it is also a more commonly used material.
Shenzhen Rongdian Printing Products Co., Ltd. is located at 303, 3rd Floor, Building 2, Potoudu Industrial Zone, Longxi Village, Longcheng Street, Longgang District, Shenzhen, Guangdong Province, China. It mainly deals in various printing products: stickers, product color boxes, exquisite gift boxes, picture albums , Promotional color pages, trademark tags, envelope receipts! Shenzhen Rongdian Printing Products Co., Ltd. adheres to the production philosophy of "printing every product with heart" and strictly implements it! Looking forward to your visit~
Custom transparent packaging box, transparent packaging box manufacturer, transparent packaging box printing
RONG DIAN PACKAGING & PRINTING CO.,LIMITED , https://www.rodiantpackaging.com