Technical Specification
Â| Product name | Emergency shut off valve/bottom loading valve |
| Normal Diameter | 3inch 4inch |
| Normal Pressure | 0.6Mpa |
| OpenWay | pneumatic |
| materials:aluminum | aluminum |
| Medium | diesel/gasoline |
| Working Temperature | -40ºC-+70ºC |
Emergency shut-off valve,also known as bottom loading valve,installed the bottom of tankruck,which could be fueling download.The operating principle is simple,the festival is safe and environmental protection.
Pressure balance type bottom loading valve for the multi position tanktruck,can be loading and unloading in separate oil warehouse.Three through the design of the pipeline,Relieve load,operation is simple,safe and reliable.
Internal pressure is small,large flow,valve flange with cutting groove in the tank,the Groove break can not carrying too much force,body pipeline and tank will automatically disconnect when the accident occurred,and automatic spring on the plunger and durable will remain sealed medium in the tank will not leak,so as to ensure the oil tank safety.the cylinder piston rod could be folded,manual way whe no gas source of the other reason can not be opened,in accordance with international standard GB/2002MT.
Â
Â
The biomass burning machine needs to work under negative pressure. At the same time, the ID fan must be installed to ensure the negative pressure. If it is applied to aluminum melting furnace, greenhouse heating, drying room and other working conditions, it can be operated at slightly positive pressure. However, it is necessary to ensure the smooth flow of the flue; the cross-sectional area of the exhaust outlet and the power of the induced draft fan will be carried out according to the requirements specified by the engineering department of our company.
It must be equipped with a special operator to operate, the operator must be guided by the machine can operate the machine. If the product is used in a boiler, it should be submitted to a qualified boiler installation company for installation. If there is a size deviation due to the size of the burner mouthpiece, the size of the boiler's crater must be corrected. The product must be reported to the local boiler inspection office for approval. Qualified boiler maintenance unit.
Biomass Burner,Biomass Granule Burner,Biomass Burning Furnace,Biomass Fuels Furnace
Jinan Shanghangda Machinery Co., Ltd. , https://www.jinanshdmachine.com