Optimistic about the development of LED lighting market, the corporate circle is rumored, Taiwan's LED chip leading plant, Jingdian intends to integrate its two major investment LED packaging factory Edison and Haotian Technology. The legal person pointed out that the expertise of Edison and Haotian are in the middle and high power LED lighting modules. If it can be smoothly integrated, the virtual alliance of the crystal power planning will be more complete and stable, which is beneficial to Jingdian and Edison. Grab the lighting business opportunities.
Li Bingjie, chairman of Jingdian, said recently that the penetration rate of LED lighting is rapidly increasing. It is estimated that from this year, it will enter gold for three years. However, because the market is growing, so the competition is fierce, so we must be prepared for transformation.
The transformation is ready. Li Bingjie also revealed that since the beginning of 2017~2018, the penetration rate has reached a high point, and it is necessary to prepare for the transformation, and the crystal power is ready. In May 2012, Jingdian subscribed for the private equity of Haotian Private Equity with 140 million yuan (NTT, the same below), which totaled 8 million shares, accounting for 17.39.
In addition, in 2012, Jingdian first acquired the Edison stock held by the former vice chairman of Edison, Sun Zongding, in the after-hours trading, and successively purchased Edison stock in the open market. Through the subsidiary Jingxin Investment and Highlights Investment holds approximately 6.8 shares of Edison.
Haotian Edison's products complement Edison Wu Jianrong as the chairman of the LED packaging factory Min Mingsi at the end of 2012, not only through the production of PLCs (PlasticLeadedChipCarrier, plastic electrode wafer carrier), which complements Edison's medium and low power layout. At the same time, the monthly production capacity has jumped from less than 100 million to 450 million. In addition, the high-power COB (ChiponBoard, integrated package) has a capacity of about 6 million, the finished module is 500-800 million, and the traditional bracket type is 6 million.
In addition to medium and high power LED lighting products, Haotian also produces medium and large size panel backlights, high-definition digital cameras and mobile phone flashlights, high-resolution indoor and outdoor display applications, automotive application light sources and other special lighting applications.
The legal person expects that Haotian and Edison's product line will have complementary effects, and the LED packaging factory also shows the trend of the larger Evergrande. The cooperation between the two parties will expand the competitive niche.
Edison plans to start the merger and acquisition of Edison. As the working days return to normal, the current average capacity utilization rate has also risen from 70 in January and February to 75. It is expected that the second season will be raised to more than 80. The overall order visibility is still maintained at 4-6 weeks.
Edison pointed out that the second quarter and the third quarter are the peak season of the commercial lighting market. Although the price decline trend cannot be avoided, the price decline also pushes up the demand. In order to increase market share, Edison does not rule out the resumption of mergers and acquisitions when conditions are right.
Polyamide 6 slices, commonly known as Nylon 6 slices, nylon 6 slices. Because the macromolecule contains an amide bond (-C-NH-), it is called polyamide. Nylon 6 slices are usually in the form of white columnar particles, with a melting point of 210-220°C and a decomposition temperature of about 300°C. Soluble in phenol and hot concentrated sulfuric acid, excellent electrical insulation performance, good alkali resistance and corrosion resistance. Nylon is the fiber with the best wear resistance among synthetic fibers. Nylon 6 Chips are soluble in phenol and hot concentrated sulfuric acid, have excellent electrical insulation performance, good alkali resistance and corrosion resistance.
Nylon 6 slices are divided by use:
1. Fiber-grade slices can be used for spinning civil yarn, making underwear, socks, shirts, etc.; for spinning industrial yarn, making tire cord, sail wiring, parachute, insulating material, fishing net wire, safety belt, etc.
2. Engineering plastic grade slices, which can be used to produce gears, housings, hoses, oil-resistant containers, cable sheaths, equipment parts of the textile industry, etc. of precision machines.
3. Film-drawn slices can be used in the packaging industry, such as food packaging, medical packaging, etc.
4. Nylon composite materials, including impact-resistant nylon, reinforced high-temperature-resistant nylon, etc., are used to make appliances with special needs, such as reinforced high-temperature-resistant nylon can be used to manufacture impact drills, lawnmowers, etc.
Colored Nylon 6 Chips,Pa6 Black Chips,Yarn Use Pa6 Black Chips,In-Situ Pa6 Black Chips
HAIYANG TECHNOLOGY CO.,LTD , https://www.hypa6.com