Cleaning available industries: industrial high pressure water paint rust removal equipment/machines, oil well drill pipe high pressure water cleaning machine, casting sand cleaning pressure washer, paint removal rust high pressure water cleaning machine, coal mine high pressure water cleaning machine, ore high pressure water cleaning machine .
Condenser high pressure water cleaner, tank high pressure water cleaner, chemical plant cleaning reactor high pressure water cleaning equipment, rubber scale high pressure water cleaner, machine repair high pressure high temperature cleaner, steam pipe high pressure water cleaner, construction truck high pressure water cleaner , 500 kg high pressure water cleaner, 350 kg high pressure water washer, Italian high pressure water washer.
High pressure water blasting rust removal pressure washer main push type
First, high-pressure chiller: (can be hand-held manually, according to the requirements of the design of automatic and mechanical operating system)
A.HD28/18: Working pressure 250BAR Flow 600L/H Power 11KW Voltage 380V/50HZ Weight 88KG Size 700×500×680(mm)
Standard: 20M high pressure pipe, automatic spray qiang and fan nozzle.
Optional: rotating nozzle; fine inlet filter; 10M high pressure pipe and fitting; repair kit;
HD28/18 cold water pressure washer
Brand: Italy AR Power: 11KW
Power supply: 380V Weight: 230 kg
Working pressure: 280 kg working flow: 15L/MIN
Pump speed: 1450R/MIN Motor speed: 1450R/MIN
Start control mode: the maximum temperature of the power supply to start the water: 45:
Functional purposes: Universal cleaning paint removal rust, general efficiency, can remove 6-8 square meters per hour, and optional preservative inhalation system for cleaning after anti-corrosion. The system is economical and practical, with the least investment in the same efficiency.
B.HD35/21: working pressure 330/350BAR flow 1260L/H power 16KW voltage 380V/50HZ weight 220KG size 980×770×915 (mm) Standard: 10M high pressure pipe, 1Mqiang bar, automatic spray qiang and ordinary nozzle
Optional: rotating nozzle; fine water inlet filter; 10M or 20M high pressure pipe and fitting; weixiu package; sandblasting accessory
HD35/21 (350 bar, 21 l/min, 15kw/380v/50hz)
HD35/21TST cold water pressure washer
Brand: Italy AR Power: 15KW
Power supply: 380V Weight: 230KG
Working pressure: 350BAR Working flow: 21L/MIN
Pump speed: 1450R/MIN Motor speed: 1450R/MIN
Start control mode: power start maximum inlet temperature: 45C
Functional purposes: General cleaning, general efficiency casting sand cleaning, spraying before and after cleaning, paint rust removal, removal of 10-12 square meters per hour, and optional preservative inhalation system for cleaning after anti-corrosion. System quality is stable, work efficiency is centered, dirt, paint and rust can be removed.
C.HD50/22: Working pressure 500BAR Flow 1320L/H Power 22KW Voltage 380V/50HZ Weight 475KG Size 1100×800×990 (mm) Standard: 10M high pressure pipe, 1Mqiang bar, automatic spray qiang and ordinary nozzle.
Optional: Rotary sprinkler; fine inlet filter; weixiu bag; sandblasting accessory
HD50/22 (500bar, 22l/min, 22kw/380v/50hz)
HD50/22 Cold Water High Pressure Water Washer
Brand: Italy AR Power: 22KW
Power: 380V Weight: 280 kg
Working pressure: 500BAR Working flow: 22L/min
Pump speed: 1450R/MIN Motor speed: 1450R/MIN
Start control mode: power start maximum inlet temperature: 45C
Functional purposes: For high-efficiency mechanical oil cleaning, precision casting sand removal and sand removal paint rust removal, and optional preservatives inhalation system for cleaning after anti-corrosion. Can remove 10-15 square meters of paint per hour.
The above three kinds of equipment use sandblasting accessory to siphon through high-pressure water jets to inhale dried river sand and spray at a high speed of 290-480M/S per second to the metal surface coating to remove the paint or rust on the surface; Wet sand blasting method is used to recycle river sand. The system includes: water sand collection tank, mortar pump and rubber hose. The water and sand mixture is sent to the sandblasting accessory. This method can effectively use abrasives and has high cleaning efficiency.
Second, ultra-high pressure water jet equipment: direct removal of paint rust, no need to add sand
A.HD150/45: ordinary paint pressure 1400BAR; flow 44L/M; power 132KW; full set of precision filtration; frequency stepless pressure adjustable stepless; full set of intelligent protection; automatic start and stop; European imports of industrial ceramic piston pump Or domestic assembly pump; armored structure; standard 1 spray qiang1 combination nozzle and 1 ultra high pressure hose. Hand-held must be equipped with two sets of spray qiang. 30 square meters can be cleared every hour.
Note: The above high-pressure water jet system can be manually operated, or it can be designed according to the requirements of automatic and mechanical operating systems.
B.HD250/20: Metal paint pressure 2500BAR Flow 20L/MIN Diesel drive Power 220HP is equipped with a rotating nozzle, which can directly and quickly remove various marine organisms, paint and rust on the surface of the ship, and make the hull surface bright as new.
Source: Beijing Hengde Century Cleaning Equipment Co., Ltd.
Bakelite Injection Molding Machine
Bakelite, also known as bakelite, also known as phenolic molding, is a thermosetting plastic with high impact toughness, stable quality, corrosion resistance, heat resistance and low temperature. Generally speaking, the process of Dewei forging bakelite Injection Molding Machine brand is divided into the following processes. You can have a look together to better understand the knowledge of bakelite injection molding.
1. Bakelite mold heating
Unlike Plastic Mold, bakelite mold can be produced after being put on the machine. It takes a long time to heat up bakelite mold.
2. Temperature rise of bakelite injection molding material
The customized material of bakelite injection molding machine is generally powder. Under the friction formed by the barrel heating device and the screw, the thermosetting plastic in the barrel is melted by heat to achieve the effect of pre-setting plastic material.
3. Injection molding of bakelite products
After the completion of pre-molding, the mold closes, the screw rod starts to inject, and the molten material is pushed by the screw from the barrel nozzle through the main channel, the diversion channel and the gate of the mold into the mold core, and the mold core is fully filled. Because the melted material is cut and heated during injection molding and the mold is at high temperature, the temperature of the melted material rises rapidly into a fast response situation. The injection time of bakelite products is different from that of plastic products, and the injection time of bakelite products is relatively long.
4. Dry and solid under pressure
After injection, it will enter the pressure maintaining state immediately. The effect of pressure maintaining has two aspects: one is shrinkage, and the other is to ensure that the product structure produced by the bakelite injection molding machine manufacturer can be close and firm. After the completion of pressure maintaining, it will be delayed for a period of time, waiting for the material to be completely dry and solid, and then the product will be finalized.
5. Ejection of bakelite products
Open the mold to eject the finished product, clean the mold, and wait for the next the first mock examination product to go out.
Bakelite Injection Molding Machine,Bakelite Injection Molding Machine ,Bakelite Injection Moulding,Automatic Bakelite Moulding Machine
Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com