Introduction:Â Â
Â
Universal Testing Machine/ Tensile tester/ textile belt test / webbing tensile testing machine / tensile strength tester / tensile testing mchine (Digital display, computer control type, various test grips for steel, plastic, ceramic, wood, wire, pipe etc. )
Â
1, Perform tension, compression, flexure/bending and shearing for specimens. Suitable for metal and nonmetal material, such as iron, steel, steel bar, rebar, rod, spring steel, wire, cable and so on.
Â
2.1, WDW Series computer controlled electronic UTM is dual space structure, tensile test executed at upper side of crosshead, compression and bending test executed at lower side of crosshead. Â
2.2, High stiffness of the leading screw and robust crosshead structure, maximum elimination the effection of loadframe deformation;
2.3, Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension etc., this UTM can be used to metal, non-metal, composite material like rubber, steel wire, plasitc, seat belt, textile character test.
Â
Specification:
Â
Model | WDW-10E WDW-10Y | WDW-20E WDW-20Y | WDW-50E WDW-50Y | WDW-100E-600E WDW-100Y-600Y | |
Max. load | 10KN | 20KN | 50KN | 100KN ~ 600KN | |
Measuring force range | 0.4% - 100% | ||||
Accuracy of testing force | ±0.5% of indicated value | ||||
Displacement resolution | 0.001mm | ||||
Crossbeam speed range | 0.1 mm/min - 500 mm/min, stepless, adjustable freely | ||||
Effective testing space | 800mm (enlarge available) | ||||
Effective width | 450mm (enlarge available) | 600mm (enlarge available) | |||
Tensile grips type | Wedge type grip Flat jaws:0-14mm , Round jaws: Ø4-Ø14mm | Wedge type grip Flat jaws:0-20mm , Round jaws: Ø4-Ø20mm | |||
Power supply | 220V±10%, 50/60Hz | ||||
Working environment | 10ºC - 30ºC, relative humidity≤80% | ||||
Dimension | 830×550×1900mm | 1000×750×2260mm | |||
Weight | 550Kg | 1100kg | |||
Key part | "E" type, Taiwan TECO servo motor; "Y" Type, Japan Panasonic servo motor "E" type , China super brand load cell "Y" Type, USA Vishay Celtron load cell Korea Taijing Precision ball leading screw Omron Photoelectronic encoder |
||||
Standard Accessories |
Decelerator, PC, printer, Smartest software, wedge tensile grip, jaws, compression platen, Multiple loadcells in one machine is avaliable. |
Â
3. Standards:
3.1 Comply with ISO, BS, ASTM, JIS standard and so on.
Â
4. Measuring and control system:
4.1 Based on full digital STC300 measuring and control card;Â Â Â Â Â Â Â Â Â Â Â
4,2 Realize load, deformation, corsshead displacement, test precess four kind close loop control;
4.3 Data collection system use 4 channel of high accuracy 24 digit A/D conventer;
4.4 Resolution can upto 1/500000, full range without step;
4.5 Choose BB, AD, Xilinx etc. brand famous integrated components, fully digital design;
Â
5. Loadframe structure and Driven type:
5.1 Loadframe is floor type, with high strength, low deformation, compact structure and beautiful appearance;
5.2 Adopt Circular Arc Profile Synchronous Belt Transmission, eliminate dual direction clearance;
5.3 Adopt Japansonic AC servo motor and driving system, ensure transmission and moment of force stable;
5.4 Adopt imported high accuracy ball leading screw, stable transmission.
Â
Â
Lifelong after sales service & maintenance;
Response within 24 hours for any problem;
Overseas training, installation is avaliable.
Â
Â
                                         Â
Belt/webbing tensile test fixture             800mm large extensometer
 1 fumigated heat treating wooden package; Â
 Size: 1620*980*930mm;    Gross weight:  750kgÂ
Â
 Ship from Qingdao seaport/ by sea;Â
Qingdao Evertech Industry Co., Ltd as a testing instruments supplier in Qingdao China, founded in 1985, is a high-tech company in metal and non-metal materials testing, measureing, analytical industries. Focus on quality and service, we are trying to fulfill your comprehensive testing requirement.Â
England The King's School Mr.Graham Swindley:
Products arrive in good conditions, thanks a lot for your fully cooperation and patience.
Â
Greece AGRICULTURAL UNIVERSITY OF ATHENSÂ Mr. Dimitrios Briassoulis
Mr. *** contact with me today, he plan to purchase your product too, I told him all god about you. I think he will place order to you soon. Besure I will introduce more friends to you for your products. Â
Â
Â
USA University of Central Missouri Mr. Troy OllisonÂ
The goods can fully meet our test requirement, I appreciate your quickly response and fast delivery.
Introduction:Â Â
Â
Universal Testing Machine/ Tensile tester/ textile belt test / webbing tensile testing machine / tensile strength tester / tensile testing mchine (Digital display, computer control type, various test grips for steel, plastic, ceramic, wood, wire, pipe etc. )
Â
1, Perform tension, compression, flexure/bending and shearing for specimens. Suitable for metal and nonmetal material, such as iron, steel, steel bar, rebar, rod, spring steel, wire, cable and so on.
Â
2.1, WDW Series computer controlled electronic UTM is dual space structure, tensile test executed at upper side of crosshead, compression and bending test executed at lower side of crosshead. Â
2.2, High stiffness of the leading screw and robust crosshead structure, maximum elimination the effection of loadframe deformation;
2.3, Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension etc., this UTM can be used to metal, non-metal, composite material like rubber, steel wire, plasitc, seat belt, textile character test.
Â
Specification:
Â
Model | WDW-10E WDW-10Y | WDW-20E WDW-20Y | WDW-50E WDW-50Y | WDW-100E-600E WDW-100Y-600Y | |
Max. load | 10KN | 20KN | 50KN | 100KN ~ 600KN | |
Measuring force range | 0.4% - 100% | ||||
Accuracy of testing force | ±0.5% of indicated value | ||||
Displacement resolution | 0.001mm | ||||
Crossbeam speed range | 0.1 mm/min - 500 mm/min, stepless, adjustable freely | ||||
Effective testing space | 800mm (enlarge available) | ||||
Effective width | 450mm (enlarge available) | 600mm (enlarge available) | |||
Tensile grips type | Wedge type grip Flat jaws:0-14mm , Round jaws: Ø4-Ø14mm | Wedge type grip Flat jaws:0-20mm , Round jaws: Ø4-Ø20mm | |||
Power supply | 220V±10%, 50/60Hz | ||||
Working environment | 10ºC - 30ºC, relative humidity≤80% | ||||
Dimension | 830×550×1900mm | 1000×750×2260mm | |||
Weight | 550Kg | 1100kg | |||
Key part | "E" type, Taiwan TECO servo motor; "Y" Type, Japan Panasonic servo motor "E" type , China super brand load cell "Y" Type, USA Vishay Celtron load cell Korea Taijing Precision ball leading screw Omron Photoelectronic encoder |
||||
Standard Accessories |
Decelerator, PC, printer, Smartest software, wedge tensile grip, jaws, compression platen, Multiple loadcells in one machine is avaliable. |
Â
3. Standards:
3.1 Comply with ISO, BS, ASTM, JIS standard and so on.
Â
4. Measuring and control system:
4.1 Based on full digital STC300 measuring and control card;Â Â Â Â Â Â Â Â Â Â Â
4,2 Realize load, deformation, corsshead displacement, test precess four kind close loop control;
4.3 Data collection system use 4 channel of high accuracy 24 digit A/D conventer;
4.4 Resolution can upto 1/500000, full range without step;
4.5 Choose BB, AD, Xilinx etc. brand famous integrated components, fully digital design;
Â
5. Loadframe structure and Driven type:
5.1 Loadframe is floor type, with high strength, low deformation, compact structure and beautiful appearance;
5.2 Adopt Circular Arc Profile Synchronous Belt Transmission, eliminate dual direction clearance;
5.3 Adopt Japansonic AC servo motor and driving system, ensure transmission and moment of force stable;
5.4 Adopt imported high accuracy ball leading screw, stable transmission.
Â
Â
Lifelong after sales service & maintenance;
Response within 24 hours for any problem;
Overseas training, installation is avaliable.
Â
Â
                                         Â
Belt/webbing tensile test fixture             800mm large extensometer
 1 fumigated heat treating wooden package; Â
 Size: 1620*980*930mm;    Gross weight:  750kgÂ
Â
 Ship from Qingdao seaport/ by sea;Â
Qingdao Evertech Industry Co., Ltd as a testing instruments supplier in Qingdao China, founded in 1985, is a high-tech company in metal and non-metal materials testing, measureing, analytical industries. Focus on quality and service, we are trying to fulfill your comprehensive testing requirement.Â
England The King's School Mr.Graham Swindley:
Products arrive in good conditions, thanks a lot for your fully cooperation and patience.
Â
Greece AGRICULTURAL UNIVERSITY OF ATHENSÂ Mr. Dimitrios Briassoulis
Mr. *** contact with me today, he plan to purchase your product too, I told him all god about you. I think he will place order to you soon. Besure I will introduce more friends to you for your products. Â
Â
Â
USA University of Central Missouri Mr. Troy OllisonÂ
The goods can fully meet our test requirement, I appreciate your quickly response and fast delivery.
Zinc Die Casting Products are a metal forming process in which molten zinc metal is put under pressure and injected into a die.
Zinc are alloys that have high strength and hardness, outstanding corrosion resistance,full recyclability, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Zinc alloys possess high dimensional stability for complex shapes and excellent thin walls. The cost of raw material is low.
Zinc Die Casting Products are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Zinc Die Castings can also be easily plated or finished. Zinc Die Casting Products are dimensionally stable and heat resistant.
Although this alloy exhibits excellent casting characteristics, it has seen limited use by die casters. It does however possess some interesting characteristics that may be of assistance to designers. Its creep performance is rated higher than the other zinc alloys and it maintains higher strength and hardness levels after long-term aging.
The behavior of zinc alloys under stress is non-linear and time-temperature dependent on strain-rate, i.e. the ratio of stress to strain is not constant, even at low stresses, and varies with time resulting in continuous plastic flow under constant applied load. Designers of structural components should be aware of the creep limitations of zinc alloys, which do not have a single value for elastic modulus or yield strength. Yield strength (allowable stress) under sustained loading is dependent on the allowable design strain (% elongation) over the required service life. Working values for the elastic modulus and yield strength are important for design purposes. Standard engineering formulae used for calculating cross-sections of elastic materials must therefore be used with some caution.
This alloy exhibits excellent damping capacity and vibration attenuation in comparison with Aluminum Die Casting alloys.
We have professionally produced Zinc Die Casting Products nearly 7 years. The parts have a great property of high quality, high precision, reasonable competetive price. our products are very popular.
Zinc Die Casting Products
Zinc Die Casting, die casting parts, Zinc Alloy Die Casting, Zinc Casting, Hardware Parts, Valve Parts, Auto Parts
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com