Electro Hydraulic Putter Electro Mechanical Actuators Electric Cylinders Actuator

Posted on

Model NO.: DYT450I Parallel Type
Trademark: x-ing
Transport Package: Container
Specification: As per drawing
Origin: China
Model NO.: DYT450I Parallel Type
Trademark: x-ing
Transport Package: Container
Specification: As per drawing
Origin: China

Overall Dimensions and Installation Dimension of DYTP ,DYTPS Parallel type electro -
hydraulic actuator 

Model Shape size installation size
D D1 L L2 H2 R L1 L3 H I d H1 Ф1 M
DYTP450I 108 200 205 565 180 25 105 40 130 20 25 30 20 22×1.5
DYTP450II 108 200 205 570 180 25 105 40 130 20 25 30 20 22×1.5
DYTP450III 108 200 205 625 180 25 105 40 130 20 25 30 20 22×1.5
DYTP450IV 108 250 205 685 220 25 105 40 130 20 25 30 20 22×1.5
DYTP700I 108 200 220 570 180 25 120 40 130 30 35 30 20 27×2
DYTP700II 108 200 220 620 180 25 120 40 130 30 35 30 20 27×2
DYTP700III 108 250 220 685 220 25 120 40 130 30 35 30 20 27×2
DYTP700IV 108 250 220 715 220 25 120 40 130 30 35 30 20 27×2
DYTP1000I 133 200 220 585 200 35 120 60 180 30 35 40 30 27×2
DYTP1000II 133 250 220 655 220 35 120 60 180 30 35 40 30 27×2
DYTP1000III 133 250 220 685 220 35 120 60 180 30 35 40 30 27×2
DYTP1000IV 133 300 220 830 250 35 120 60 180 30 35 40 30 27×2
DYTP1500I 133 200 255 590 200 35 155 60 180 30 35 40 30 33×2
DYTP1500II 133 250 255 665 220 35 155 60 180 30 35 40 30 33×2
DYTP1500III 133 250 255 755 220 35 155 60 180 30 35 40 30 33×2
DYTP1500IV 133 300 255 900 250 35 155 60 180 30 35 40 30 33×2
DYTP2000I 165 250 265 655 240 45 165 70 200 40 40 40 40 42×2
DYTP2000II 165 250 265 710 240 45 165 70 200 40 40 40 40 42×2
DYTP2000III 165 300 265 920 260 45 165 70 200 40 40 40 40 42×2
DYTP3000I 165 250 285 660 240 45 165 70 200 40 40 50 40 48×2
DYTP3000II 165 250 285 710 240 45 165 70 200 40 40 50 40 48×2
DYTP3000III 165 300 285 935 290 45 165 70 200 40 40 50 40 48×2
DYTP5000I 165 250 335 705 240 55 205 80 200 40 40 60 50 52×2
DYTP5000II 165 300 335 920 260 55 2058 80 200 40 40 60 50 52×2
DYTP8000I 219 300 380 830 290 65 230 100 260 50 50 70 60 68×2
DYTP12000I 273 350 460 1040 350 75 260 110 320 60 70 80 70 85×2
Note: S for the trip (mm): when the dust cover L, L plus 0.1S, P-axis pin swing, Ps-tail suspension

DYTPS Parallel type electro - hydraulic linear  actuator 

Introduction:
DYTP series of electro-hydraulic linear actuator  for reciprocating push, pull straight (or reciprocating
rotation of a certain angle) movement, can be used to rise, drop or clamp the work of the place, can also be
used for long-distance and high-altitude dangerous areas, and computer Networked for centralized (program)
control. It is widely used in metallurgy, mining, coal, electricity, machinery, food, cement, chemical industry, water
conservancy, transportation, transportation, port, military equipment and other industries, is an indispensable
general power source. This product has the following advantages compared with the electric push rod cylinder
hydraulic cylinder:

1, electro-hydraulic putter can start with the load, and electric putter is very difficult.
2, the same electro-hydraulic putter in its rated push and pull range, the push and pull can be stepless
    adjustment, which has a wide range of driving force, and the electric putter and cylinder can not be done.
3, in the thrust and speed the same circumstances, the electro-hydraulic putter power consumption is electric
    putter and electric actuators half.
4, electro-hydraulic putter with full hydraulic drive, action sensitive, smooth operation, with effective mitigation of
    external impact, stroke control accuracy, cylinder, electric putter and electric actuator can not do.
5, electro-hydraulic putter with machine, electro-hydraulic integration of closed structure, the work of oil
    circulation in the pressure of the cylinder, small size, no oil, easy installation and maintenance. In the harsh
    environment of anti-dust, anti-water, the internal non-corrosive, life than the cylinder, electric putter, electric
    actuator for a long time.
6, small investment. Cylinders need to build expensive air compressor station, air pressure pipe leakage, air
    pressure instability, high noise; hydraulic cylinder to be established pump station, and electro-hydraulic putter
    simply turn on the power can be used.

The working principle

1, electro-hydraulic putter is a mechanical and electrical integration of closed structure, which to the
    implementing agencies, control agencies and pressure pumps. Motor oil pump, hydraulic control valves and        hydraulic cylinders can be mounted on the same axis, can also be installed on different axes as needed.
    Connected to the motor power supply, by controlling the motor reversing the two-way pump output pressure
    oil, the hydraulic control valve sent to the cylinder to achieve the reciprocating motion of the cylinder piston
    rod.

2, the hydraulic control valve group mainly by the relief valve, control valve, hydraulic check valve, etc., can
    also be based on the working characteristics of electro-hydraulic putter, the design of different functions of
    the oil combination valve to meet their work requirements. General introduction of self-locking, pull back from
    the lock and push-pull are self-locking; speed adjustable and non-adjustable type; the overall putter has a
    horizontal use, up to use, down use.

Order Note: Electro-hydraulic putter mainly by the putter installation form, the motor protection rating, rated
output power, travel, speed and use of angle, the six elements. Users can also support the special requirements
of three regulatory functions. Namely: speed adjustment, stroke adjustment (limit switch position). In addition to
these three regulatory functions must be specified when ordering. Other Please refer to the model preparation
method, fill in the six basic requirements.

Structure:
Electro Hydraulic Putter Electro Mechanical Actuators Electric Cylinders Actuator
1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9,
Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide
sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork
Electro Hydraulic Putter Electro Mechanical Actuators Electric Cylinders Actuator

Our workshop

Electro Hydraulic Putter Electro Mechanical Actuators Electric Cylinders Actuator

Electro Hydraulic Putter Electro Mechanical Actuators Electric Cylinders Actuator
 

Overall Dimensions and Installation Dimension of DYTP ,DYTPS Parallel type electro -
hydraulic actuator 

Model Shape size installation size
D D1 L L2 H2 R L1 L3 H I d H1 Ф1 M
DYTP450I 108 200 205 565 180 25 105 40 130 20 25 30 20 22×1.5
DYTP450II 108 200 205 570 180 25 105 40 130 20 25 30 20 22×1.5
DYTP450III 108 200 205 625 180 25 105 40 130 20 25 30 20 22×1.5
DYTP450IV 108 250 205 685 220 25 105 40 130 20 25 30 20 22×1.5
The Pneumatic Rubber Fender is also called Yokohama Fender. It consists of 3 different layers: the outer rubber layer, the synthetic-cord layer for reinforcement and the inner rubber layer. With the feature of the soft reaction force, lower mooring forces in rough weather conditions, simple and low installation and maintenance cost. The pneumatic Rubber Fender is widely used in the ship to ship and ship to dock operations in the marine industry.

Net Type Pneumatic Fenders are fitted with a chain-tyre net. The chain-tyre net consists of used tires that are connected by a network of horizontal and vertical chains, which adds further protection to the fender body.

Net Type Pneumatic Fenders

Yokohama Fender,Net Type Pneumatic Fenders,Yokohama Rubber,Yokohama Floating Fenders

Shandong Nanhai Airbag Engineering Co., Ltd. , https://www.nanhaimarine.com