Gw40 Manual Steel Bar Bender Machine for Construction Working

GW40 Manual Steel Bar Bender Machine For Construction Working

It is ideal equipment for steel bar bending working.This model has reasonable design,simply structure.It enables to bend bars of diameters¢ 3~42mm to various shapes,which is applicable in many kinds of construction projects such as bridge,tunnel etc.


COMPONENTS:
MOTOR TYPE: Automatic BRAKE MOTOR
GEAR BOX: CAST STEEL   INSIDE GEAR: C45 STEEL
GEAR SHAFT: C45 STEEL  WORKING DISK:  C45 STEEL
STOP GAUGE: C45 STEEL PILE HEAD: CR 40 STEEL
EXTERNAL CASE: Q235 
 
Products Advantages 
1.The working disk is inserted into the working table which made the external appearance pleasant at sight and the operation easy to handle.
 2.Adopted the fully ENCLOSED TYPE CASE so that distortions, which happen under the condition of heavy load, can be avoided.
 3.GEAR, GEAR SHAFT, WORKING DISK, STOP GAUGE  and PILE HEAD are made of high quality ALLOY STEEL which has undertaken the HEAT TREATMENT (quenching and tempering), this is in order to make sure that the important parts can ensure REALIABLE OPERATION also under heavy load conditions and guarantee LONG-LASTING WORKING LIFE.
 4.Totally adopt bearing type featured with FLEXIBLE MOVEMENT and long working life.
 5.The AUTOMATIC model adopted Brake Motor, insert pin type location disk to ensure the ACCURACY of bending radian and the convenience of the adjustment.
 6.The stop gauge can be installed from FOUR DIFFERENT CORNERS to realize the requirement of putting steel bar from VARIOUS DIRECTIONS.
 7.The ARTICULATED type MOTOR is convenient and FAST to adjust.
 8.Unlike normal benders, there is no need to add lubricant frequently on to the main bearing sliding bush, just pour enough lubricant before use. It is also CONVENIENT for usage and MAINTENANCE.
 9.The controlling table adopted rotary type which made the transportation and operation full of HUMANIZATION.
Worry-saving:  The main components last for 10 years, and main wear parts can last for 3 years, which  almost cost you nothing for maintenance.
Time-Saving:  The international advanced structure ensures the fastest bending speed.
Labor-saving:  One machine to cut different sizes of steel bar without changing the blade.
 
I. Main Ttechnical Parameters: 
 
II Bending capacity : 
 
III. Maximum Quantity of Rebar to Be Bended at One Time
 





  GW40 Manual Steel Bar Bender Machine For Construction Working

It is ideal equipment for steel bar bending working.This model has reasonable design,simply structure.It enables to bend bars of diameters¢ 3~42mm to various shapes,which is applicable in many kinds of construction projects such as bridge,tunnel etc.


COMPONENTS:
MOTOR TYPE: Automatic BRAKE MOTOR
GEAR BOX: CAST STEEL   INSIDE GEAR: C45 STEEL
GEAR SHAFT: C45 STEEL  WORKING DISK:  C45 STEEL
STOP GAUGE: C45 STEEL PILE HEAD: CR 40 STEEL
EXTERNAL CASE: Q235 
 
Products Advantages 
1.The working disk is inserted into the working table which made the external appearance pleasant at sight and the operation easy to handle.
 2.Adopted the fully ENCLOSED TYPE CASE so that distortions, which happen under the condition of heavy load, can be avoided.
 3.GEAR, GEAR SHAFT, WORKING DISK, STOP GAUGE  and PILE HEAD are made of high quality ALLOY STEEL which has undertaken the HEAT TREATMENT (quenching and tempering), this is in order to make sure that the important parts can ensure REALIABLE OPERATION also under heavy load conditions and guarantee LONG-LASTING WORKING LIFE.
 4.Totally adopt bearing type featured with FLEXIBLE MOVEMENT and long working life.
 5.The AUTOMATIC model adopted Brake Motor, insert pin type location disk to ensure the ACCURACY of bending radian and the convenience of the adjustment.
 6.The stop gauge can be installed from FOUR DIFFERENT CORNERS to realize the requirement of putting steel bar from VARIOUS DIRECTIONS.
 7.The ARTICULATED type MOTOR is convenient and FAST to adjust.
 8.Unlike normal benders, there is no need to add lubricant frequently on to the main bearing sliding bush, just pour enough lubricant before use. It is also CONVENIENT for usage and MAINTENANCE.
 9.The controlling table adopted rotary type which made the transportation and operation full of HUMANIZATION.
Worry-saving:  The main components last for 10 years, and main wear parts can last for 3 years, which  almost cost you nothing for maintenance.
Time-Saving:  The international advanced structure ensures the fastest bending speed.
Labor-saving:  One machine to cut different sizes of steel bar without changing the blade.
 
I. Main Ttechnical Parameters: 
 
II Bending capacity : 
 
III. Maximum Quantity of Rebar to Be Bended at One Time
 





 

Cleaning equipment is mainly used to clean up large, medium and small impurities (wheat straw, wheat bran, sandy soil, wheat hair) and stone chips in raw grain. The quality of flour is guaranteed. This type of equipment can also be used for cleaning and seed selection of other cereals. The machine has the advantages of high production efficiency, good cleaning effect, low noise, good dust removal effect, simple operation, simple and convenient maintenance and so on.

If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inquiry,Please send mail directly to us.

Flour Machine Washing Equipment

Flour Machine Washing Equipment,Flour Purifier Machine,Clean Grain Machine,Cleaning Grain Machine

Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com