The introspective method of the sewage suction truck (garbage truck) belt is very simple. First, introspect the tension of the belt. At this time, you can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10kg. Assuming that the belt is about 10mm, the belt tension is considered suitable. Assuming that the amount of reduction is excessive, the tension of the belt is considered to be insufficient. Assuming that there is almost no reduction in the belt tension, the tension of the belt is considered excessive. In the absence of tension, the belt is slippery. When the tension is too large, it is very easy to damage the bearings of various auxiliary machines. For this purpose, the relevant adjusting nuts or bolts should be loosened and the tension of the belt should be adjusted to the optimum shape.
In addition, the maintenance of the sewage suction truck (garbage truck) must also pay attention to the wear of the belt. Old belts are worn out and the contact area between belts and pulleys is drastically reduced. At this time, just press the belt with force and the belt sinks deep into the groove of the pulley. The belt rubber also has an aging problem. If the belt rubber is seriously aged, it must be changed in time.
The sewage suction truck ( garbage truck ) engine is the brain of the car. If the engine is bad, it means that a car is useless. Sewage vehicles (garbage trucks) are required to run on the road every day. If they are used for a long time, they may cause wear or aging of the engine belt. Therefore, after a certain period of time, the owner of the vehicle should begin to inspect the belt so as to avoid unnecessary troubles.
Edible Luster Dust,Food Grade Pearl Dust,Edible Glitter Powder,Decorative Cake Dust
Kolortek Co., Ltd. , https://www.micapowders.com