The upper part of the tank of the BF type flotation machine is a diagonal prism, and the middle part is a truncated cone above the lower circle. The main shaft and the lower impeller can be considered as a hyperbolic boundary triangle formed by the impeller, and the edge base lining fixes the top impeller.
During operation, the low pressure compression charge is delivered through the outer tube of the shaft to the center of the impeller. The role of the impeller is limited to compressively inflate the dispersion and prevent the deposition of mineral particles. Since it is not necessary to suck the vacuum into the aeration, a lower rotation speed can be used, which can reduce the wear of the impeller, improve the quality of the product, and bring efficiency to the product.
The tapered bottom of the BF flotation machine eliminates the "dead zone" to prevent deposits in the bottom of the tank. In the central groove far from the impeller, the discharge port communicating with the lower portion of the impeller communicates with the pipe to the next other groove. The flotation machine is connected in series by a set of double tanks. Since the middle portion of the middle portion of the tank interacts with the edge of the impeller to circulate with the foam in the impeller, the bubbles can be fully contacted for mineralization.
Vent Filter Housing
Vent housing is designed for the pharmaceutical, food and beverage, Water Treatment and other industries' gas filtration, in the container, reactors, storage tanks and other equipment, to remove the impurities, bacteria, provides a clean and easy way to let filtered air into tanks as well as allowing gases to flow out. It is in line with the GMP design requirements.
Stainless Steel Vent Filter Housing
Vent Filter Housing,Stainless Steel Vent Filter Housing,Air Filter,Steel Vent Filter Housing
Ji'an city Qing Feng Filter Equipment Material CO.,Ltd , https://www.qingfengfilter2.com