China's wire and cable industry by the domestic large-scale infrastructure projects in the positive impact of its market development prospects have been optimistic, but due to the impact of technological development, the development of wire and cable industry ushered in a technological turning point.
Although the cable industry in China has experienced more than 20 years and has made great strides, it still has not got out of the big but not strong cycle. Compared with the first-class enterprises in the world, there is still a big gap. There are many problems such as the low degree of industrial concentration, the large number of enterprises, the small scale, the insufficient scale economy, the insufficiency of independent innovation and the prominent structural contradictions of products. Despite these problems, the cable industry in China is facing new opportunities for take-off, that is, the opportunity to rapidly improve its core competitiveness in its development. With the continuous changes in the world economic structure, China's cable industry is bound to face reorganization, reshuffle. In particular, in recent years, China's economy faces the bottleneck of energy and electricity shortages. As the country continues to increase its investment in electricity, the industry has entered a leapfrog development period. In order to implement the decision of the Central Government to increase infrastructure construction and stimulate domestic demand, SGCC plans to step up its investment and speed up the pace of power grid construction. It is estimated that the investment scale in the next two to three years will exceed 1 trillion yuan, of which Urban Network and Main Grid construction and transformation of investment 790 billion yuan. Construction scale of 110 (66) kV and above transmission lines 260,000 km, the transformation capacity of 1.35 billion kVA.
Into 2013, China's wire and cable industry will usher in many opportunities for development, the same pressure on the shoulder of the wire and cable companies can not automatically dissipated. It can be said that business opportunities and pressures in China's wire and cable industry coexist in 2013 and even in 2016.
According to the "2012-2016 wire and cable industry macroeconomic environment and industry development trend analysis report" shows that during the "12th Five-Year" period, China's wire and cable industry has benefited greatly from the rapid development of China's rail transit construction. The speeding up of China's railway construction will bring tremendous demand for locomotive cables, communications and signal cables and other markets. The annual average demand will reach 16-20 million km and 70,000-100,000 km respectively. Urban rail transit will generate annual demand for vehicle cables 2.5-3 million km; traffic signal cables with an annual demand of 15-2 million km. It can be seen that the increase in the number of railway operators will drive the strong demand for rail transit. In the meantime, the demand for wire and cable will soar with equally strong momentum.
This year, the Ministry of Railways plans to invest 800 billion yuan to complete the railway infrastructure, and China's railway mileage will also increase by 10,000 kilometers. According to the standard calculation method, the general traction power supply accounts for 7% -10% of the total cost of the rail transit project. The investment of 800 billion yuan will achieve 80 billion yuan traction power supply market. This shows that China's wire and cable industry will usher in a warm spring in 2013. Market demand is an objective reality, but how to get a piece of the rail transit construction depends on the strength of the wire and cable manufacturing enterprises. Obviously, as the state invests more and more in the construction of rail transit, it will not only bring market to the wire and cable industry, but also put higher demands on wire and cable enterprises. How to meet the special requirements of rail transit for locomotive cables, communication and signal cables, tunnel special cables, leakage and radio frequency cables, and power cables and lighting cables is the key to obtaining orders for wire and cable manufacturers.
L Feeding Sleeve Wrapper With Tray
Conveying belt can set on right or left depends on design and demand. And speed of the feeding conveyor is controlled by a frequency inverter. Film feeding is controlled by sensors to reduce the waste of the film. Meanwhile, Heat Shrink Packager has the Omron temperature controller to ensures the accuracy of the sealing hot.
ST-6030A + SM-6040 L Feed Sleeve Wrapper and Shrink Tunnel is the special design for single product or the things with tray, it can combine with production line, operate the feeding of the product, wrapping the film, sealing the film, shrinking the product, cooling the product together automatically. ST-6030A adopts advanced technology and art design; ensure it works stably and reliably.
All operation controlled by PLC, integrate with the machine, electricity and gas work smoothly.Adopted special design of sealing cutter to make sure sealing line deep-set, avoid film sticking the cutter. SM-6040 adopts double motors to blow the hot air reach every corner inside the tunnel to make sure the perfect performance of shrinking. Adjustable heavy cool air ensure the shape of the shrinking perfectly.uses to packing beverage, beer and mineral water, cans, glass bottles with tray or carton.
L Feeding Sleeve Wrapper With Tray,Feeding Sleeve Wrapper Equipment With Tray,Auto Feeding Sleeve Wrapper With Tray,Shrink Wrap Machine In Europe
SUZHOU SHENGBAIWEI PACKAGING EQUIPMENT CO.,LTD , https://www.sbwpack.com