The secret of truck burning diesel

First of all, diesel is a light petroleum product, a mixture of complex hydrocarbons (about 10 to 22 carbons). Mainly divided into light diesel oil (boiling range of about 180 ~ 370 °C) and heavy diesel (boiling range of about 350 ~ 410 °C) two categories. Light diesel oil is mainly used for automobiles and trucks, and heavy diesel oil is mainly used for heavy machinery and medium and small ships. The latter has a higher density than the former, a higher calorific value, a higher burning point and a more viscous one. Because the characteristics are stable and the ignition point is low, it can be ignited without worrying about the deflagration phenomenon. A large combustion chamber can be made, and gasoline cannot. If petrol is cranky and kerosene is cheerful, then diesel's character can be described as stable. Compared with gasoline, diesel fuel has a high energy density and a low fuel consumption rate, but the exhaust gas contains more harmful components (NO, particulate matter, etc.).

1.jpg

Large diesel engine

Because diesel engines have higher thermal efficiency, higher power, lower fuel consumption and more economical than gasoline engines, they are becoming more widely used. And for some ships and heavy machinery, because of the high load required, there is no requirement for speed increase, but the power and torque (especially torque) are highly demanded. The high calorific value of diesel and the high compression ratio of diesel engine can be more fully utilized. Its energy, although the speed does not go up, but the power is strong that is not comparable to the gasoline engine.

2.jpg

Light diesel engine

As high-speed diesel engines (for automotive use) are more fuel efficient than gasoline engines, the demand for diesel is growing faster than gasoline, and some small cars are also switching to diesel. For trucks using light diesel oil and some domestic cars, the advantages of simple diesel engines, high reliability, and low fuel consumption stand out because they do not have much demand for acceleration performance. In addition, the diesel engine will also deposit carbon, but the diesel engine is not very sensitive to the adverse effects of carbon deposition.

Therefore, currently diesel engines are generally suitable for trucks. This is why most of the current trucks are burning diesel.


We introduce ourselves as the leading manufacturer of  Cylinder Liners, cylinder head ,Piston Crown ,Piston Skirt ,valve stem,Valve Seat ,valve housing etc. since last 25years in China.

if you are having any inquiry regarding the products, please send us at your earliest.

and it is it is full range of the cylinder head for the following type :

AAA) YANMAR DIESEL ENGINE     
K(D)L, KFL-T, 6MAL-H/T/HT/DT, S165-T/ST/EN,     
S185-ST/UT/ET, M200L-UN/SN/EN/M220L-UN/SN/EN / N 330 

     
BBB) DAIHATSU DIESEL ENGINE     
PS22/26/ DS18(A)/ DS(B)22/

DL20/22/28/ DK20   / DK 28 
     
CCC) NIIGATA DIESEL ENGINE     
 6L(M)25BX/6M28AFTE/BX/6M31X/EZ/EX      
     
DDD) AKASAKA      
AH30/AH38/ AH40/D/F/  A31/34/37/41/ DM28/30/33/36/38/40(A)K/ DM46/  UEC37H-HB/ UEC 37/88H     
UEC 37LA/ UEC45LA/ UEC52LA/ UEC52HA/ UEC60HA/  UEC60LS/ UEC45HA/115 ALL UET TYPE     
     
EEE) MITSUBISHI    (KOBE AND AKASAKA ) 
45/75C/ 45/80D/ 52/90D/ 52/105D.E/

UEC37H-IIB/ UET37/88HA/UEC45HA.LA/ UEC52HA.LA/ S6B/      
ETC     
     
FFF) HANSHIN     
6LU(D)26/ 6LU(N)28A/ 6LU(D)32/6LU(D)35/ 6LU(S)38/ 40 / 6LU40/ 6LU46A/ 6LU50A/

6EL30/ EL(S)32     /6EL(S)35/ 6EL38/ 6EL40/ 6EL(S)44/50A/     

GGG) MAN B&W     
L35MCE/L50MCE/ L60MCE/ 40/54A     
     
HHH) MITSUBISHI PURIFIER     
SJ700~SJ1800/SJ 2000


III)SULZER 

 RND 68 RND 76 RD 44



JJJ) MAKITA

GSLH – 633 637                 KSLH -633 637



Kkk) PIELSTICK

PC 2-5  PC 2-6









 

Engine Cylinder Head

Engine Cylinder Head,Cylinder Head Gasket,Diesel Cylinder Head,Cylinder Head For Shipping

ZhouShan HeCheng Machinery Co., LTD. , http://www.hcmarineparts.com