Overpacking in China still stands out

“The law clearly stipulates that enterprises should rationally package their products, reduce the excessive use of packaging materials and the generation of packaging waste, but this provision has not been implemented well.”

Recently, when Chen Zhili, vice chairman of the Standing Committee of the National People's Congress, addressed the 16th session of the Standing Committee of the 11th National People's Congress about the implementation of the Cleaner Production Promotion Law, he particularly spoke of the over-packaging problem that the people had strongly complained about.

Chen Zhili said: “In recent years, more and more goods have too many levels of packaging, the gap is too large, the luxury of materials used for materials selection, and packaging materials are difficult to recycle, which wastes resources, increases consumer burden, and pollutes the environment. ”

According to statistics, China consumes 40 million tons of packaging materials each year, mainly from over-packaging.

"In addition, the proportion of enterprises for the recovery of products and packaging is still very low." Chen Zhili pointed out that although the law clearly stipulates a mandatory review and mandatory recovery system, it lacks strong constraints and corresponding supporting regulations. For enterprises that do not implement cleaner production audits and do not fulfill their product or packaging material recovery obligations, the legal liability is limited to ordering corrections within a time limit. For those who refuse to make corrections, a fine of not more than 100,000 yuan is imposed. The legal deterrence is insufficient, and it is difficult to promote corporate consciously. action.

Chen Zhili stated that according to legal requirements, the State Council and its relevant departments should improve the supporting laws and regulations as soon as possible, formulate a catalogue of compulsory recyclable products and packaging, and specific recovery measures as soon as possible, implement regular inspections and announce the inspection results system to the public. We must take effective measures to promote the over-packaging problem.

  • Most commonly used in mud lubricated drilling tools.
  • Tungsten carbide covers approximately 55% of surface area. (Can cover more depending upon tile configuration and placement)
  • Typical life expectancy: 300 – 400 hours. (Run life solely depends upon drilling environment, mud composition, bend settings, carbide configuration and quality)
  • Average hardness for the tungsten carbide is 70 HRC. (Different compositions are available at customers request)
  • Average hardness of substrate is 28-36 HRC. (Many material and heat treating options are available)
  • Common sizes available include but are not limited to: 2 1/8", 2 3/8", 2 7/8", 3 3⁄4", 4.75", 5", 6.25", 6.50", 6.75", 7.75", 8", 9 5/8", and 11 1⁄4"
  • Both imperial and metric units are available.


tc tile bearing


Tile Style Tc Bearing

Tile Style Tc Bearing,Tc Tile Bearing,Tile Tc Bearing,Tc Bearing

ROTATE DRILLING MOTOR CO., LTD , http://www.tcbearings.com