Slurry pump wear repair steps explain

On-site repair of slurry pump casing wear step

1. Disassemble the pump body and have repair conditions;

2. Flush the repaired volute with steam and a clean water source to remove residual media;

3. Roughing the repaired parts with sandblasting or electric tools to expose the original metallic color;

4. Use a clean compressed air to remove surface dust;

5. Brush the SD3000 primer material in the repaired area;

6. Proportionately blending Sole carbon nanopolymer materials;

7. Apply the Sole SD7400 material to the repaired area to a smooth surface;

8. Install the rotor impeller after the material is solidified;

9. Put into operation.


During Interior and Exterior care, 

wax applicators

car wax applicator sponge,car wax applicator pads autozone, body wax applicator,car polish applicator,car wax applicator