Disposable container seals with laser printing:
| Model: | YL-HJ-G05 |
| Material: | Galvanized Steel covered with ABS |
| Dimension: | Total height:85mm |
| Usable height:79mm | |
| Diameter:10mm | |
| Printing: | Laser printing sequential numbers or customized. |
| Colour: | Yellow,Green |
| Packaging: | 10pcs/box,400pcs/ctn |
| Advantages/characteristics: | 1. Resistant to corrosion and weathering 2. High Security 3. Removed with bolt cutters 4. Available in a variety of colors |
| Application: | 1. Containers 2. Trailers 3. Rail Cars |
About Yingli:
   Established in 2000, Foshan Shunde Ying Li Industrial Co., Ltd is located in RongguiÂ
 town of Shunde,Guangdong Province,China.For over 15 years, we are devoted to developing and producing plastic cable tie, electrical wires accessories, binds, buckles, transportation security products and various of seal markers, and built up an  experienced  technical and scientific management efficient team.Welcome to contact with us for any query at tel:0086-757-28800236 or visit our website:  www.chinayumai.com for more information.Â
In general, some metal sheets are formed by hand or die stamping to produce plastic deformation, forming the desired shape and size, and can be further welded or a small amount of mechanical processing to form more complex parts.
Stamping process is a kind of metal processing method, which is based on the plastic deformation of metal, and USES the mould and stamping equipment to apply pressure on the Sheet Metal, so that the sheet metal produces plastic deformation or separation, so as to obtain the parts (stamping parts) with certain shape, size and performance.
Stamping forming technology in automobile body manufacturing process occupies an important position, especially large automobile body covering parts, because the most complicated shape, the structure of large size, some still space curved surface, and surface quality requirement is high, so use stamping processing method is used to make these parts can't be matched by other processing methods.The cab of the truck, the Sheet Metal Parts in the front of the truck, the van board, the various body coverings of the car and the various skeleton of the bus are almost all made by stamping.
Sheet Metal Stamping,Sheet Metal Stamping Parts,Stamping Bending Plate,Bending Stamping Parts
YaoPeng Metal Products Co., Ltd. , https://www.ypmfg.com