Glass water and car membrane use vary

Glass is like the eyes of a car, which determines the safety of the car. Glass can not be timely maintenance will bring all kinds of trouble to the owners, some owners in the vehicle maintenance, only looking to maintain some large parts, but it is easy to forget the glass in front of the eye, if the owner of the intention to clean the glass, also It will bring dynamism to your own driving, and you will have a good vision and driving mood. Let us talk about the maintenance of automotive glass today!

The windshield of a car can determine whether the driver's line of sight is clear or not. In summer and winter, due to the complicated climatic conditions, the windshield glass is prone to problems such as mirror fog or mirror reflection, and the driver can easily confuse driving at night or in bad weather conditions. Line of sight, affecting driving safety. In the summer when there is a lot of rain, there will be many shellac or like traces of rain. In winter, some rain and snow can easily cause frost on the mirrors. These problems seem simple, but they are not easy to handle.

Use glass water rationally

In the ordinary glass maintenance process, we need to select suitable glass water according to the season and the specific conditions of the weather. When we find that the surface of the windshield glass is obscure, it will be brighter with suitable glass water. In the evening, it was found that the glass was chaotic. It could also be wiped with glassy water. In addition, in the case of high-speed running or dusty conditions, glass water can be used very quickly, and it is necessary to pay attention to the timely injection of new glass water.

Some owners think that cleaning glass can only be decontaminated, so using detergent or detergent instead of glass water, some owners even cheaper, directly with water instead, these are hidden problems. There are some deposits in chemical detergents such as washing powder. It takes a long time to easily corrode the rubber tubes, and it will block the water outlets. In severe cases, it will damage the motor. The general detergent will continue to corrode the rubber tube to accelerate the catalysis of the reticle rubber strip. When the hardened rubber strip scratches the windshield glass, the surface of the windshield glass will be scratched and scratched. If the wiper is replaced again, the cost will be several ten times that of glassy water. Although the ordinary clean water is very clean, but there are many chemical residues inside, and over time, it can cause the water outlet to clog and affect the water spray. The use of long-term use will increase the friction of the mirror surface and make it easy to leave slight scratches on the mirror surface during wiper cleaning.

Love car film that thing

In summer, a thin layer of insulation film can play a big role, not only can withstand the hot sun, but also heat insulation, UV protection. Insiders pointed out that the heat insulation effect is one of the important reasons for consumers to choose a film. In addition, the light transmittance and UV protection index of the heat insulation film are all consumers must care about. However, many consumers have many misunderstandings about the insulation film.

The automotive insulation film is divided into front and rear windshield films and side windshield films. Among them, the most demanding insulation film is the front windshield. According to the regulations of the Ministry of Public Security on traffic safety, the light transmittance of the front windscreen must be greater than 70%, which is based on the premise that traffic safety is not affected. The front windshield is the most taboo to stick dark film. In addition, when selecting the UV resistance index of the thermal insulation film, the higher the better, because it can protect the components of the center console and prevent the sun from prolonged exposure to premature aging.

As for the windshield glass thermal insulation film, it also presupposes that it does not affect the owner's observation of the rearview mirror. The optional thermal insulation film for side windshields is more flexible and the colors are more varied. For example, the owner likes blue light insulation films.

If the car is equipped with a GPS navigator, the owner should select a non-metal film product because most of the explosion-proof membranes on the market today still belong to the metal film, which does cause interference to the GPS signal.

In addition, the film has a simple process: cover the necessary parts of the car, clean the glass, cut the film, shape the insulation film on the window glass, trim the corners according to the shape of the glass, form a film, blow the edge with a hair dryer, and finally clean. These steps are indispensable. If the film is not effective, the owner can ask the shop to rework, so that the car glass can be best protected.